logo
좋은 가격  온라인으로

제품 세부 정보

> 상품 >
로우 핀 관
>
ASTM A334 Gr.1 Alloy Steel Integral Low Fin Tube for Enhanced Heat Transfer

ASTM A334 Gr.1 Alloy Steel Integral Low Fin Tube for Enhanced Heat Transfer

브랜드 이름: Yuhong
모델 번호: ASTM A334 GR.1
MOQ: 100kg
가격: 협상 가능
포장에 대한 세부 사항: Ply-Wooden 케이스 / 철 케이스 / 플라스틱 캡이있는 묶음
지불 조건: l/c, t/t
상세 정보
원래 장소:
중국
인증:
DNV, BV, PED, LR, ABS, TS, CCS
수관식:
로우 핀 튜브, 일체형 핀 튜브
애플리케이션:
열교환기, 보일러
사양:
ASME A334
핀 두께:
0.3 밀리미터
튜브 유형:
원활한
FPI:
19-27
재료:
GR.1
ndt:
HT, ECT
공급 능력:
1000 톤/월
강조하다:

ASTM A334 Gr.1 alloy steel low fin tube

,

integral low fin tube for heat transfer

,

alloy steel enhanced heat transfer tube

제품 설명

ASTM A334 Gr.1 Alloy Steel Integral Low Fin Tube for Enhanced Heat Transfer

 

Description:
Integral low fin tubes are produced by cold rolling the outer surface of a seamless tube to form uniform fins directly from the base material. Since the fins are an integral part of the tube wall (not added separately), this structure ensures excellent thermal conductivity, mechanical strength, and resistance to fin detachment.
ASTM A334 Grade 1 alloy steel integral fin tubes are designed for efficient heat transfer in low-temperature and moderate-pressure applications, such as air coolers, condensers, and heat exchangers used in petrochemical and power industries.

 

Materials:

  • Base Tube: Alloy Steel ASTM A334 Grade 1 (Seamless)

Key Advantages:

  • Fins are integral with tube wall — no risk of detachment

  • Excellent thermal contact and heat transfer performance

  • Good mechanical strength and pressure resistance

  • Suitable for low-temperature applications

  • Long service life and easy maintenance

Chemical Composition of ASTM A334 Grade 1

Element C Mn P S Si
Composition (%) ≤0.30 0.40–1.06 ≤0.025 ≤0.025 ≤0.10

 

Mechanical Properties of ASTM A334 Grade 1

Value / Property Tensile Strength Yield Strength Elongation
Unit MPa MPa %
Requirement ≥ 415 ≥ 240 ≥ 30

 

Comparison Between ASTM A179 and ASTM A334 Gr.1 Low Fin Tubes

Feature / Type A179 Low Fin Tube A334 Gr.1 Low Fin Tube
Material Carbon Steel Alloy Steel
Tensile Strength (MPa) ≥ 325 ≥ 415
Temperature Range Normal to moderate temperature Low temperature service
Corrosion Resistance Standard Better
Thermal Conductivity Higher Slightly lower
Typical Use Air coolers, condensers Low-temperature heat exchangers

 

 

Applications:

  • Air Cooled Heat Exchangers

  • Condensers

  • Low-temperature Heat Exchangers

  • Petrochemical and Power Generation Equipment

ASTM A334 Gr.1 Alloy Steel Integral Low Fin Tube for Enhanced Heat Transfer 0 

등급 & 리뷰

전체 평점

4.0
이 공급자에 대한 50개의 리뷰를 바탕으로

평점 스냅샷

모든 등급의 분포는 다음과 같습니다.
5 별
33%
4 별
33%
3 별
33%
2 별
0%
1 별
0%

모든 리뷰

K
Kumar
India Nov 8.2025
No corrosion issues so far, though we're running below dew point carefully. Installation was straightforward—tube sheets lined up, ends clean, rolling into the header went smooth.
S
Salem
Oman Sep 24.2025
We checked a few before installation — wall thickness consistent, roundness good. Welded in without problems.
M
Marek
Poland Sep 5.2025
Heat transfer has been consistent since day one. Our outlet temperatures are steady, and the exchanger is performing exactly as we expected.