|
| 브랜드 이름: | YUHONG |
| 모델 번호: | ASTM A268 TP405 스테인리스 스틸 튜브 |
| MOQ: | 1000KGS |
| 포장에 대한 세부 사항: | 플라스틱 캡과 함께 나무로 되는 케이스 /Iron Case/ 뭉치 |
| 지불 조건: | 신용장, 티/티 |
ASTM A268 TP405 / UNS S40500 Stainless Steel Seamless Tube Heat Exchanger Tube
ASTM A268 TP405 is a low‑cost, SCC‑resistant ferritic tube ideal for moderate‑temperature heat exchangers and boilers where austenitic grades fail due to chloride cracking. Its key limitation is embrittlement at 475°C and poor low‑temperature toughness. For welded tube, post‑weld annealing is mandatory to achieve acceptable ductility.
Advantages of Grade 405 ferritic stainless steel
Excellent chloride stress corrosion cracking (SCC) resistance
Lower cost
Lower thermal expansion
Higher thermal conductivity
Magnetic
Good oxidation resistance
Resists polythionic acid SCC
No sensitization
Good weldability (with PWHT)
Good resistance to hydrogen attack
Lower allowable stress at moderate temperatures
Chemical Composition % of STM A268 TP405 Ferritic Stainless Steel Seamless Tube
| Grade | C | Mn | Si | P | S | Cr | Ni | Mo | Cu | N |
|
TP405 |
0.08 max | 1.00 max | 1.00 max | 0.045 max | 0.030 max | 11.0-13.0 | 0.50 max | 0.60 max | 0.25 max | 0.10 max |
Mechanical Properties of ASTM A268 TP405 Ferritic Stainless Steel Seamless Tube
| Grade | Tensile Strength | Yield Strength | Elongation | Hardness |
| TP405 |
480 - 620 MPa (70 - 90 ksi) |
205 MPa (30 ksi) |
20-25%(acc. thickness) |
160-190 HB |
When to Specify TP405 vs. Austenitic (TP304/316)
| Condition | Recommendation |
|---|---|
| Chloride SCC risk (e.g., seawater, brine, caustic) | TP405 (or other ferritic) |
| High temperature > 600°C (1112°F) | Austenitic (e.g., TP304H) |
| Cryogenic or sub‑zero service | Austenitic (TP304) – ferritic becomes brittle |
| High pressure steam (> 500 psi, > 400°C) | Austenitic (creep strength) |
| Cost‑sensitive, moderate corrosion, no SCC risk | TP405 |
| Welding without PWHT possible | Austenitic (ferritic requires PWHT) |
Application
Heat exchanger bundles in hydrotreaters, catalytic reformers, and amine service (where chloride SCC is a concern).
Boiler feedwater heaters (low temperature end).
Condensers using brackish or chlorinated cooling water.
Refinery overhead condensers (wet H₂S / chloride environment).
Automotive exhaust heat exchangers (EGR coolers).
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
전체 평점
평점 스냅샷
모든 등급의 분포는 다음과 같습니다.모든 리뷰